How To Charge Whoop 4.0

Are you ready to experience more performance, endurance and aerodynamic flight capabilities from your Whoop 4.0 drone? Here are some tips to ensure you get the best out of your powerful flying quadcopter.

1. Plug the USB cable into the quadcopter itself. Disconnect the USB from the battery before being plugged into your PC, laptop, or wall plug.

2. Connect the quality charger with the quadcopter. It has a four pole connection at the top side, two for charging and two for the battery pack, which should face up.

3. Once the connection is established, the LED indicator will slowly flash blue, telling you that it is now charging the battery.

4. The LED indicator will turn to red when the drone is in the process of charging and green when the battery is full. Ensure you leave the drone charging for at least an hour before flying with it, as this will allow it to fully charge.

5. When the battery is full, disconnect the charger immediately. If left plugged in for longer than necessary, the battery might become damaged.

6. Check the remaining battery life using the free smartphone app before flying. This will provide you with the most accurate information about your device.

7. Before flying, always make sure that your Whoop 4.0 is in safe mode. This means that the drone will not fly straight away, but will give you time to intervene and adjust the settings, if needed.

8. When the drone is airborne, keep in mind the maximum speed and height limit. Flying too fast or too high can be dangerous and may damage your drone.

By following these tips, you can ensure that your Whoop 4.0 is properly powered and ready for an amazing flight experience.